How To Remove Bike Pump Without Losing Air?

presta-valve-air-leaks

Bike pumps are fairly easy to use and they’re very convenient especially when you get stuck on the side of the road. But did you ever notice that no matter how much air you put into your tires, there’s always a bit of the air that leaks out before you can close the valve?

The chances are high that you have been dealing with this issue and if that leads you here – you’re in the right place.

Why?

Because down below, you’ll learn how to remove bike pump without losing air. Yes, it’s possible so keep on reading!

Why Tires Lose Air When You Connect the Bike Pump?

bike-tire-losing-air

It is common to lose air while connecting or removing the bike pump.

Most of the time, the air will be lost when you remove the pump from Presta valves. Remember, the air will escape from the side of a valve. You can notice it when using floor pumps because it comes with a hose to manage air. Also, floor pumps have a check valve at the ending of the hose.

The check valve will hold the air pressure even after removing the handle of the pump. Once you release a valve, the high-pressure air will escape. If you are using a handheld pump, air loss will be less than others.

After removing the pump, you can notice an explosive air sound but there is nothing to worry about because it is normal. I recommend you avoid touching sensitive areas of the valve when removing the pump. You can avoid air escape with your precise and quick movement.

How To Prevent the Air Leaking Out of Your Tires After You Pull Out the Pump?

presta-valve-air-leaks

If you want to remove the bike pump without losing air, try to unscrew the head as soon as possible. Feel free to hold the valve with index finger and thumb. Put everything (hose, head, and valve) in a line to screw coupling and turn freely.

Avoid exceeding the maximum pressure limit of a tire. The right pressure is an essential element for every bike. The tire must be solid to avoid the tire deflecting. The check valve plays an essential role in holding the air. After inflating your tires, you have to flip the switch over the pump head.

Immediately make locking nut tight and cover tire valves to avoid loss of air. Your tire can lose air after removing the pump from it, and it is absolutely normal.

How To Remove Bike Pump Without Losing Air?

removing-the-bike-pump

To avoid losing air when removing the bike pump, you must act quickly and close the valve. If air begins leaking out of valves after taking the pump off, you may have a busted seal. The seal may bust in the inner tube, but remember, the valve should be sealed on functional tubes even after unscrewing the tip.

Sometimes, the head of the switcher catches on a Presta valve. Use rapid and slight rocking motion to lift the head straight up to decrease air loss. Unfortunately, air loss while detaching an air pump with screw-type heads is sometimes unavoidable. Try to line up everything and turn as quickly as possible.

Don’t Forget To Lock the Presta Valve After Pumping Your Tires

locked-presta-valve

The right pressure is essential in tires for a comfortable ride. It allows you to prevent the possibility of flats but it also reduces the rolling resistance of your wheels. The use of the Presta valve is common among bikers. The Presta valve has a narrow diameter, such as 0.6 mm, and the Schrader valve is 0.8 mm.

Check the pressure of your tire and determine the right pressure. You will need a pump compatible with the Presta valve. If you do not have a compatible pump, feel free to buy an adapter instead of getting the new pump. Unscrew the end of the Presta valve to open it. Make it loose by pressing the core inward. An airburst means you are ready to fill the air.

Secure a pump to the Presta valve by pushing its head down and lift the lever to lock the head. If you are noticing the movement of the valve inside the head, it is not secure. You have to push it down more. Start pumping once the pump is entirely secure. Hissing out sound during pumping means the head is not secure.

Carefully evaluate the pressure while pumping and stop pumping after getting the desired pressure. Press a lever down to release your pump head and pull the head off a valve quickly. Remember; don’t forget to lock the Presta valve after pumping your tires. Secure a pump to the valve by pushing the head down on the valve. Lift the lever to lock the head of the valve.

You have to act quickly to avoid losing air after removing the bike pump. Remove the adapter, air pump, and make locknut tight. Finally, replace a cap to trap air inside. Make sure to check your tire before leaving your home. A pressure gauge will help you to improve the quality of your ride. Feel free to carry a CO2 cartridge in the bag to add extra air in tires.

Conclusion

Sometimes, losing air is inevitable and you can at least use the proper technique to deal with it correctly to lose the least air. But is there actually a correct way how to remove bike pump without losing air? Yes, there is.

Therefore, stay prepared as a quick reaction can help you keep your air in the tires so you won’t have to re-pump your tires.

If you’re dealing with an excessive air leak from your tires – there can be a couple of reasons for this. It’s either the pump or your valve.

Some air loss is normal – but it can definitely be an annoying situation when you’re just trying to check your tire pressure before the long ride.

What valve type does your bike have? How are you dealing with air loss when pumping up the tires?

If you need any help, want to share advice, or you just have a question to ask – feel free to leave a comment down below and I’ll do my best to help you out!

Leave a Reply

Your email address will not be published. Required fields are marked *